· Electronic speed control
· Pipe racks
· Oil cooler
· Cathead
· Breakout wrench hydraulic cylinder
· Front hydraulic outrigger jack
· E-3 mast extension
· Extended mast height
· Corded remote control
· Wireless remote control
· Tailgate
· Rear bumper
· Receiver hitch

· Toolboxes
· Mast lights
· Walking beam
· Special paint colors
· Line-X spray-on bed liner
· Utility body
· Deck
· Headache rack
· Wire winder
· Plastic pipe reel
· Power to the rear
· Other options are available on request

Product Description:

The 4T is designed for fast line speed while maintaining 3 ton capacity.  Fast and easy setup by means of a self supporting mast with two 3 1/2" bore hydraulic cylinders.  A guy cable is not needed in most situations.  Designed to allow for easy access to hard-to-get-to pumps and windmills.  The 4T is designed to mount on 3/4 ton or larger truck.  Weight is approximately 2,200 lbs.


Standard features: 

Mast: 35 ft. high telescoping mast with 10 ft. maximum layback
Capacity: 2,000 lbs. single line, 6,000 lbs. with 3 part line
Mainline speed: 150 feet per minute
Mainline cable: 3/8" X 150' with open spelter socket
The mainline spool is driven by a heavy duty pinion gear with the pinion shaft direct coupled to the hydraulic motor.  Braking is accomplished with a Hunke automatic fail safe brake.
Line Block: Block for reeving a 2 part or 3 part line
Hook: 3 ton safety hook
PTO for standard transmission with direct mounted pump (PTO is available for an automatic transmission at additional cost)
Hydraulic pump: Gear pump
The pump hoist may be mounted in a 48" x 9' utility body or on a deck
Open frame design allows for full use of the deck area 
Operating controls are conveniently located at the left rear corner of the rig and are accessible from ground level 
Hydraulic bypass valves are incorporated to protect from overloading
Rear hydraulic outriggers with holding valves
Holding valve on mast cylinders
White or gray paint - Standard

Optional features: 

Sandline winch: 1,000 lb. bare spool lifting capacity with 325 feet per minute line speed.  It is power-up and power-down and also incorporates a heavy duty clutch for free-fall.  Braking is accomplished with a Hunke automatic fail safe brake.  Spool capacity: 1,650 ft. of 1/4" cable, 1,050 ft. of 5/16" cable or 740 ft. of 3/8" cable.